If you want to make your PS4 controller discoverable on the PC, you must first activate it. Then, put it in pairing mode and configure it with InputMapper. Once it has been configured, reset it. Then, you can use it. You can also use the PlayStation Configuration Support to configure additional settings for each game.
Activating a DualShock 4 controller
If you have an inactive DualShock 4 controller, you may want to try activating it by going to the PlayStation dashboard and selecting the device settings. You will see a green dot if it is connected and an inactive one without one. To remove an inactive controller from the system, select Forget Device. To reconnect the controller to the PS4 and play, connect it to the PS4 with the USB cord.
If you’re using an Android device, you can pair the DualShock 4 controller with the game console using the phone’s Bluetooth feature. To do this, press the central PS button and share button for three seconds. To pair the PS4 controller with your PC, open the Bluetooth settings on your Windows 10 device. From the list of associable devices, select Wireless controller.
You can also pair the DualShock 4 wireless controller with the PS4 through the PlayStation network. First, connect the controller to the PS4 via a USB cable or a microUSB cable. Once the device has been connected, the lightbar will turn to a static color.
After connecting the PlayStation 4 controller to the PC, turn the console on and press the PlayStation button in the center of the controller. The PlayStation will then ask you to sign into your PlayStation account. If you have a PlayStation account, you can sync up to four controllers on the same account.
You can also use the DualShock 4 controller on your PC. Steam is an online game launcher and storefront that enables you to play PlayStation games using a PS4 DualShock 4 controller. You can even use the controller while playing PS4 games on the PC using Steam’s Big Picture Mode.
You can also activate your DualShock 4 by pressing the PS button on the controller. While it is connected to the PS4, its internal battery will charge. You can tell if it is fully charged by looking at the controller’s light bar, which will turn a different color if you are not holding the PS button.
Putting it in pairing mode
If you’ve got a PS4 Controller, you’ll probably want to turn the pairing mode on. This feature allows you to connect the PS4 Controller with your iOS or Android device. To do this, first turn on Bluetooth on your iOS or Android device. Then, hold down the Share or PS buttons until they become lit up, which indicates that pairing mode has been activated. You’ll also see a white light flash on the PS4 controller’s back.
If the controller is not turned on, try turning it on by pressing the Xbox button located in the middle of the controller. Hold the button for 10 seconds. The LED on the controller should blink twice or once. After pairing, the controller should show up in the list of devices. When it’s connected, the controller will have a solid blue LED.
You can also try putting your controller in pairing mode manually by connecting it to your console via a Micro USB cable. Unlike PS4 game controllers, PS4 controllers aren’t supposed to be paired with other devices using Bluetooth, but you can use the Micro USB charging cable to pair the controller to your PS4 console.
Make sure that your controller is charging when you are not using it. Otherwise, the wireless connection may not be stable. You should also try removing any metal objects from the vicinity of your PS4 console to avoid blocking the Bluetooth signal. If you’re still having trouble, borrow a friend’s DualShock 4 to see if you can pair it with a different one.
You can also use the PS4 to sync your PS4 controller with other devices. You can use the PS4 to play games on your iPad, PC, Google Chromecast, and Google Chromecast. By pairing your PS4 controller with other devices, your controller will automatically detect other bluetooth devices.
If you have a low battery on your PS4 controller, you can try turning off your PlayStation and pairing your controller to your device at startup. If the pairing process doesn’t work, you can also try turning off your iPhone or iPad for a few minutes before re-connecting. This should fix the issue.
Configuring it with InputMapper
You can configure your PS4 controller in Windows by following a few steps. The first step is to launch the InputMapper program. Then, connect the PS4 controller to your computer. Now, you can use the trackpad and light bar to move your cursor in Windows. Note that you must run InputMapper every time you want to use your controller. Once you have done this, you can set the program to automatically start with Windows.
If InputMapper does not work on your PC, try re-configuring your controller. You may find that you need to change the Bluetooth configuration to Human Interface Device (HID). After you’ve done that, you can then install InputMapper and use it on your PS4 console.
If you have an outdated version of the InputMapper tool, you may want to re-download it. Make sure to choose the Custom installation option. If the installation failed because of the new version of Windows, try reinstalling the software. This should solve your problem.
Depending on your system, you may need to install a different software to use the PS4 controller. Then, follow the installation wizard. Once you have installed the program, open the InputMapper HidGuardian application from the installation folder. You may have to run it as an administrator. Once it is open, wait until the program shows the Run DS4 Exclusively button.
The InputMapper program will link your controller to your PC. It has several settings you can change, including setting it to automatically start with Windows, start minimized, or run in the background. It also allows you to enable the Trackpad as Mouse feature, which will allow you to use the trackpad as a mouse. Furthermore, you can configure a custom lightbar and set macros for the PS4 controller.
InputMapper is a free application for Windows that allows you to map your input devices to output devices. It has a user-friendly interface and enables you to map multiple controllers. It also provides plugin support for other input and output devices.
If you have lost your PS4 controller, it’s possible to make it discoverable again. All you need is a USB adapter and a paper clip. Insert the paper clip into the hole near the left trigger button and press the reset button for five seconds. Then, reconnect the controller to the console and try again.
To do this, you will need to open Settings and choose Devices. You should see all the connected controllers. If one is currently in use, it should have a green dot. If it is inactive, the controller will be grey. To remove the device from your PlayStation console, tap Forget Device. Confirm this action, and then you can reconnect your controller to your PS4 console.
In some cases, the light on the front of your controller is not blinking, or the controller is not charging. In this case, you may need to reset your PS4 controller. If you don’t have a spare battery, you can try using a paper clip to press the reset button. Then, wait 10 seconds, and your controller should be reset.
If you can’t figure out why you can’t see your controller, then you’ve encountered a hardware issue. A corrupted controller database or damaged hard drive are among the reasons for these problems. If you can’t fix the controller, you can try resetting it via Safe Mode or by hiring a PS4 technician to help you. You can also try resetting your console to factory defaults.
A reset button is found on the PS4 controller near the L2 shoulder button. Press the reset button with a small object and then hold it for a few seconds. After that, it will reconnect to your console. Once connected, you can use your PS4 controller to play PlayStation 4 games.
If your controller is still working, it is still possible to make it discoverable with the PS4. To do so, all you need is a paper clip and a USB cable.